What is an intumescent pipe wrap?

  • Every seal labelled and photographed
  • BM TRADA / FIRAS-certificated contractors
  • Written price before any work
Get a price

We reply with a written price.

We use these details to reply to you. See our privacy notice.

A strip of grey or black material, a few millimetres thick, wound once or twice round a plastic pipe and pushed into the wall or floor where the pipe passes through. That is an intumescent pipe wrap. In a fire it swells to many times its size, squeezes the softening pipe shut and fills the hole the pipe leaves.

Wraps do the same job as fire collars, but from inside the wall or floor rather than on its face. That makes them useful where there is no room for a collar, such as a pipe close to a corner or another service, or where a neat finish matters. They are also used on some insulated pipes, where the insulation would otherwise burn away and leave a gap.

How many layers, how far into the wall and what goes round the wrap afterwards all come from the manufacturer's test. Usually the wrap sits flush with the face of the wall or floor and the gap round it is filled with mastic or batt. Some details need a wrap on each face of the wall.

The usual faults are wraps that have slipped back into the wall, wraps on the wrong size of pipe, and wraps fitted where the gap round them was left open.

A red pipe and two lagged pipes running below the head of a blockwork wall under a steel duct
A red pipe and two lagged pipes running below the head of a blockwork wall under a steel duct
Fire risk assessment asking for fire stopping?

Send the postcode, the type of building and the line from the assessment, or a photo of the gap. We reply with what it needs and a written price.

Call 01727 222296Get a quote